10 minEasy · 7 steps

How to fit the tow eye

Towing with a rope on public roads has strict rules (max distance, speed, signage) and is banned on highways in many countries. With automatic transmissions and EVs, improper towing causes damage, a flatbed is usually required. When in doubt, wait for professional recovery.

How to Fit the Tow Eye on Your Car

What you need

Step by step

  1. Find the tow eye in the trunk tool kit (with the jack).
  2. Locate the small square or round cover in the front or rear bumper.
  3. Press the marked corner or pry the cover open gently.
  4. Screw the tow eye into the threaded hole. Note: many cars use a LEFT-HAND thread: turn counter-clockwise to tighten if normal tightening does not bite.
  5. Tighten it fully using the wheel wrench through the eye for leverage.
  6. Attach the tow rope or let the recovery operator use it.
  7. When towed with the engine off: ignition on so the steering lock is off; expect very heavy steering and brakes.
Stop and call for help if
  • The car is an automatic, EV or hybrid and needs to be towed any distance: request a flatbed.
  • The thread is damaged or the eye will not seat fully.

Only work on your car when you are safely away from traffic. Your owner manual shows the exact jacking points, fuse layout and fluid specifications for your car.