10 minEasy · 8 steps

How to use a jump starter pack

Check the pack is rated for your engine size (diesel needs more power). Never let the clamps touch each other while the pack is on.

How to Use a Portable Jump Starter Pack

What you need

Step by step

  1. Turn the car fully off.
  2. Connect the RED clamp to the battery + (positive) terminal.
  3. Connect the BLACK clamp to bare metal on the engine block or chassis (or the − terminal if the pack’s manual says so).
  4. Turn on the jump starter (some have a boost/override button for deeply dead batteries).
  5. Start the car within the time the pack’s manual specifies (usually a few seconds of cranking, then rest).
  6. Once running, turn off the pack, then remove black clamp first, then red.
  7. Drive at least 30 minutes to recharge the battery.
  8. Recharge the jump starter pack when home, a dead pack helps nobody.
Stop and call for help if
  • The battery is visibly damaged or leaking.
  • The car dies again right after starting.
  • Multiple attempts fail.

Only work on your car when you are safely away from traffic. Your owner manual shows the exact jacking points, fuse layout and fluid specifications for your car.