What you need
Step by step
- Park safely, hazard lights on, vest on.
- Find the puncture. If the object (nail/screw) is still in the tread, leave it in.
- Shake the sealant bottle well.
- Connect the sealant bottle to the tire valve following the kit instructions (either screw onto the valve directly, or via the compressor).
- Inject all the sealant into the tire.
- Connect the compressor to the valve and to the 12V socket, start the engine, and inflate to the pressure on your door jamb sticker.
- If pressure will not rise after 10 minutes, the hole is too big: stop and call for help.
- Immediately drive 5–10 minutes at moderate speed to spread the sealant.
- Stop and re-check the pressure; top up if needed.
- Drive max 80 km/h directly to a tire shop. Tell them sealant is inside.
- The damage is in the sidewall or larger than ~6 mm.
- The tire will not hold pressure after sealing.
- The tire has come off the rim or the rim is damaged.
Only work on your car when you are safely away from traffic. Your owner manual shows the exact jacking points, fuse layout and fluid specifications for your car.
