30 minModerate · 11 steps

How to change a tire

Only change a tire on flat, solid ground, well away from traffic. On a highway or busy road: call roadside assistance instead. Never place any body part under a car supported only by a jack.

How to Change a Tire Safely, Step by Step

What you need

Step by step

  1. Park on flat, solid ground. Hazard lights on, parking brake firmly applied, car in gear or Park.
  2. Place the warning triangle and put on your vest.
  3. Take out the spare wheel, jack and wrench (usually under the trunk floor).
  4. Pry off the wheel cover if fitted, and loosen each wheel bolt half a turn while the wheel is still on the ground. They can be very tight: use your body weight on the wrench.
  5. Place the jack at the marked jacking point nearest the flat wheel (look for the notch or arrow under the sill).
  6. Raise the car until the flat tire is 5–10 cm off the ground.
  7. Fully remove the bolts (keep them together) and pull the wheel off.
  8. Fit the spare wheel and hand-tighten the bolts in a star pattern.
  9. Lower the car until the tire touches the ground, then fully tighten the bolts in a star pattern.
  10. Lower the car completely, remove the jack, and stow the flat wheel and tools.
  11. Check the spare tire pressure at the next gas station.
Stop and call for help if
  • The bolts will not loosen or you have no wheel lock key.
  • The ground is soft or sloped and you cannot find a safe alternative.
  • The spare is also flat or damaged.
  • You are on a highway or the traffic side of the car.

Only work on your car when you are safely away from traffic. Your owner manual shows the exact jacking points, fuse layout and fluid specifications for your car.