5 minEasy · 8 steps

How to check coolant

ONLY when the engine is fully cold. A hot cooling system is pressurized: opening it causes severe burns. If in doubt, wait longer.

How to Check Coolant Safely (Engine Cold)

What you need

Step by step

  1. Engine off and completely cold (at least 30–60 minutes after driving).
  2. Find the coolant expansion tank: a translucent tank with MIN/MAX marks and typically colored fluid.
  3. Read the level from the outside against MIN/MAX.
  4. If below MIN: place a cloth over the cap and open it slowly.
  5. Never pour cold water or coolant into a warm engine. Wait until it is cold, or you can crack the block or the head.
  6. Top up to between MIN and MAX with the coolant type your car specifies, and do not mix different types. In a real emergency clean water will get you to a garage, but use it only if you have nothing else.
  7. Close the cap firmly.
  8. If you topped up with plain water, have the mixture corrected at a garage soon (frost protection!).
Stop and call for help if
  • The tank is empty again shortly after filling, there is a leak.
  • There is oil floating in the coolant (head gasket risk).
  • The temperature warning returns while driving.

Only work on your car when you are safely away from traffic. Your owner manual shows the exact jacking points, fuse layout and fluid specifications for your car.