Guide Warning lights

How to reset the tire pressure light

The tire pressure light is a safety warning, not a reminder to clear. Resetting it only makes sense after every tire is inflated to the pressure your car maker specifies.

Reset it the right way

  1. Find the correct pressure on the sticker in the driver door frame, inside the fuel flap or in the owner manual. Do not use the maximum pressure printed on the tire.
  2. Check all four tires when they are cold, ideally before driving or after at least three hours parked.
  3. Inflate each tire to the specified pressure. Include the spare if your car monitors it.
  4. Drive for 10 to 20 minutes at a steady speed above about 30 mph (50 km/h). On many cars the light then switches off by itself.
  5. If it stays on, look for a TPMS reset button (often below the steering wheel or in the glovebox) or a reset option in the car settings menu, and follow the owner manual.

If the light flashes

A tire pressure light that flashes for about a minute after starting and then stays on usually means a fault in the system itself, such as a dead sensor battery, not a pressure problem. The tires may be fine, but the system cannot warn you. Have it checked by a tire shop.

If it comes back on

  • One tire is slowly losing air: look for a nail or screw and check that tire again the next day.
  • Cold weather lowers pressure by roughly 1 psi for every 10 °F (about 0.07 bar per 5 °C) drop.
  • A new tire or wheel may need its sensor programmed to the car.

Questions

Why is my tire pressure light on when the tires look fine?

A tire can be 25 percent under-inflated and still look normal. Always check with a gauge.

Can I drive with the tire pressure light on?

Slowly, to a place where you can check and inflate the tires. Under-inflated tires overheat and can fail. If the car pulls or you hear flapping, stop safely.

General guidance only, not a substitute for a mechanic, roadside assistance or emergency services. Your owner manual has the details for your car.